SUNNE SN-LSC-4T Laboratory Centrifuge – 4000 RPM, 1920 × g

Benchtop Laboratory Centrifuge for Routine Sample Separation

The SUNNE SN-LSC-4T is a compact low-speed laboratory centrifuge designed for routine sample separation and preparation. With adjustable speeds from 500–4000 RPM and a maximum relative centrifugal force of 1920 × g, it provides controlled centrifugation for laboratories working with compatible 10ml and 15ml tubes.

Available with 6-place or 8-place rotor configurations, the SN-LSC-4T combines a compact benchtop footprint with digital speed and timing control for repeatable laboratory workflows.

Variable Speed from 500–4000 RPM

The centrifuge provides adjustable rotational speeds between 500 and 4000 RPM, allowing operating speed to be selected according to the sample, tube and separation procedure being performed.

Speed regulation is specified to ±3 RPM, while the maximum relative centrifugal force reaches 1920 × g.

6-Tube & 8-Tube Rotor Options

The SN-LSC-4T is available with either a 6-place or 8-place fixed-angle rotor, providing different sample capacities according to laboratory throughput requirements.

Compatible configurations accommodate 10ml and 15ml centrifuge tubes, with a maximum individual tube volume of 15ml.

The required rotor configuration should be selected when ordering.

LCD Speed & Timer Control

An integrated LCD provides clear monitoring of operating parameters. The centrifuge incorporates adjustable timing from 10 seconds to 99 minutes 99 seconds, allowing defined centrifugation cycles to be set for repeatable laboratory procedures.

This is particularly useful where samples need to be processed under consistent speed and timing conditions.

Low-Speed Centrifuge for Blood & Biological Samples

The SN-LSC-4T platform is designed for routine laboratory separation and is marketed for compatible blood, cell and biological sample-preparation workflows.

Its 10ml and 15ml tube capacity makes it suitable for appropriate laboratory procedures involving compatible collection and centrifuge tubes.

Centrifugation speed, RCF and duration should always be selected according to the specific sample, tube manufacturer and laboratory protocol.

Integrated Lid Safety

The centrifuge incorporates open-lid protection and a mechanical locking system intended to help prevent access to the rotor during operation.

Manufacturer documentation also specifies mechanical unlocking capability, allowing the lid to be released appropriately in the event of a loss of electrical power.

Compact Benchtop Design

At approximately 270 × 310 × 220mm and 5.35kg, the SN-LSC-4T occupies relatively little laboratory bench space while providing capacity for up to eight compatible tubes, making it a compact addition to a workstation's laboratory equipment.

A permanent-magnet DC motor and suction-foot base support stable operation during centrifugation.